Colorado Crawl Space Before & After Photos

These 8 units all had the same issues - exposed earth with groundwater seepage, microbial growth on the wooden structure, and rodent contaminated insulation. We bagged and removed the insulation, remediated the mold, and isolated the structures from the earth with the CleanSpace 20 mil liner sealed around the perimeter. Copper mesh wire was stuffed into gaps and closed cell spray foamed over in addition to insulating the walls - to keep the subfloor exposed for maintenance of plumbing and electrical.

This homeowner had never been down in the crawlspace to see what was lurking. Turns out - without a properly sealed heavy duty liner - ground water seepage, mold, & rodents had wreaked havoc down there. We cleaned everything up, Installed a sealed 20 mil cralwspace encapsulation system over a 23 mil thick dimpled drainage matting, stuffed any voids with copper wire mesh to keep the pest out, air sealed the perimeter rim assembly with closed cell spray foam to create a continuous air & vapor barrier, insulated the subfloor with R30 fiberglass insulation, & stapled a breathable insulation barrier to bottom on the floor joists. Looks & functions great - Now its dry, warm, mold & rodents free! 

The fridge water line failed which resulted in saturated sub-floor & floor joist. After 48 hours of moisture intrusion mold began to grow. We set up proper air controls and containment's to remedy the mold & dry the structural elements. After everything dried we re-insulated, regraded the earth, laid down a thick drainage matting & a durable 20 mil liner attached and sealed to the foundation walls - all in 2 days. Looks Good!

We gave this crawl space a complete makeover - Mold & Rodent Remediation, Double Sump Sump System, Drainage matting under the 20 mil CleanSpace Crawlspace Encapsulation System, 2" foamboard insulation around the perimeter foundation walls, & closed cell spray foam insulation around the perimeter rim assembly. Now the homeowner enjoys a clean, dry, healthy home!

We were called in to help after this home experienced a large water loss. We had to remove the wet insulation from the subfloor & perimeter exterior walls, which also had rodent contamination. With the wooden structural elements exposed we could remediate the visible mold & set up drying equipment to dry the wood to less than 15% moisture content (MC). Then we installed a sealed 20 mil CleanSpace encapsulation system over the earth and walls. Next, we air sealed the perimeter rim assembly to help keep out cold air & pests. Lastly, we reinsulated the subfloor and perimeter foundation walls to help save energy and provide comfort to the floors above.